Welcome to the new and improved Football Manager Skins and Graphics Installation Guide.
This guide will show you how to install the most common types of graphics (faces, logos, kits) correctly into Football Manager.
For Instructions on how to install Skins then please refer to this Guide.
I've tweaked the format this year to try and make it as simple as possible.
First note that these instructions only apply to the Steam version of the game (whether it's a boxed copy, a CD-Key or purchased through Steam) and the instructions are generally the same regardless of your OS or whether it is the Full Mode or Touch Version you are playing and any differences will be noted in the instructions.
This guide will show you how to install the most common types of graphics (faces, logos, kits) correctly into Football Manager.
For Instructions on how to install Skins then please refer to this Guide.
I've tweaked the format this year to try and make it as simple as possible.
First note that these instructions only apply to the Steam version of the game (whether it's a boxed copy, a CD-Key or purchased through Steam) and the instructions are generally the same regardless of your OS or whether it is the Full Mode or Touch Version you are playing and any differences will be noted in the instructions.
Please note you are advised as always to run a virus scan on any file downloaded from the internet.
It is also advisable to read any instructions on the download page for the content you are installing (or found in the readme that comes with the download) as they may contain any extra instructions that are specific to that file. This is especially important for multi-part mega-packs that may need to be extracted in a certain order.
It is also advisable to read any instructions on the download page for the content you are installing (or found in the readme that comes with the download) as they may contain any extra instructions that are specific to that file. This is especially important for multi-part mega-packs that may need to be extracted in a certain order.
How To Install Graphics
This part of the guide will cover how to install 3D kits, 2D kits, facepacks, logos, trophies, backgrounds and stadium pictures and whilst each of these packs are slightly different the instructions to install them are exactly the same.
After you have downloaded a file it will generally come in one of three formats: zip, rar or 7z file.
Zip files should be automatically supported by your OS and may show up as compressed folders, Rar and 7z files may require you to download some software to extract the files, the below software is recommended:
This part of the guide will cover how to install 3D kits, 2D kits, facepacks, logos, trophies, backgrounds and stadium pictures and whilst each of these packs are slightly different the instructions to install them are exactly the same.
After you have downloaded a file it will generally come in one of three formats: zip, rar or 7z file.
Zip files should be automatically supported by your OS and may show up as compressed folders, Rar and 7z files may require you to download some software to extract the files, the below software is recommended:
Windows: 7-Zip (Choose the most recent .exe)
Linux: If you are using Linux hopefully you know how to download and locate programs for Linux already.
7-Zip is installed using the .exe you download, following the instructions on-screen. To install The Unarchiver simply double click on the .zip file you download from their website then drag the program it extracts (called 'The Unarchiver') into your apps folder.
Once installed, create a new folder somewhere you can keep track of (on your desktop for instance) and place your downloaded graphics zip, rar or 7z in it. Now we extract:
Windows: Right click on your zip, rar or 7z. Choose 7-Zip from the menu, then select 'Extract Here'.
MacOS X: Right click (or ctrl + click) on your zip, rar or 7z. Choose 'open with' then select 'The Unarchiver'.
Your file should extract and most probably create a folder in the same directory.
If you extracted an fmf file (or just straight downloaded one) this isn't a problem, these are just files that have been packed using the FM Resource Tool, and as an end user there is no need for you to mess around extracting these files, just think of these as the same as the folder you'd get from extracting the files.
Locating Your User Data Location
Once you have downloaded and extracted your files, you now need to move them over to your User Data Location so they can be read by the game.
First make sure you have run the game at least once (just getting to the start menu and exiting is fine) so the game can create the required folders for you.
The default location of your User Data Location will be slightly different depending on the OS you are using;
Windows
C:\Users\<username>\Documents\Sports Interactive\
C:\Users\<username>\Documents\Sports Interactive\
Mac OS X
/Users/<username>/Documents/Sports Interactive/
/Users/<username>/Documents/Sports Interactive/
Linux
/home/documents/Sports Interactive/
/home/documents/Sports Interactive/
(Replacing <username> with the name of the user account that you use on that computer)
If you want to move or have already moved your User Data Location then please refer to this thread to move/relocate it.
Once you have located the Sports Interactive folder you should see that it contains folders for every version of Football Manager you have run on that computer, so open the folder that corresponds to the version of FM you are using.
NOTE: Since FM17 the Touch Version has it's own folders so if using that version you'll want the Touch folder, for older versions of Touch it just used the same folder as the main game.
After you have opened the correct Football Manager folder you should see a list of folders and what you need to do is locate the folder called graphics, if this folder doesn't exist then just create a new folder and call it graphics.
Now open up your graphics folder and place the files you extracted inside it.
For the most part the sub-folders you put the graphics into doesn't matter, though it is best to separate the different types into their own sub-folders so you don't accidentally overwrite your kits with logos for the same teams. The thing to watch out for when organizing are xml files called config. These are vital and should not be mixed and matched. A set of graphics will come with a config file that is unique to them in the same folder. Make sure they stay together, in the same folder and that new png files or config files are not added or overwritten into their folder.
Whilst for best results try to keep the folder names short and simple and avoid special characters where possible.
For example below is a screenshot showing what a typical end folder should look like if done correctly, note you have a config file along with several graphic files, with a short simple folder structure that stops you from accidentally overwriting the config file when installing other graphics:
Displaying Graphics in-game
Once you have added the graphics you wanted load up the game and go into the Preferences -> Interface menu and untick 'Use Caching to decrease page loading times' and tick 'Reload Skin when confirming changes in Preferences'
So the screen should look like this:
Next select confirm and your new graphics should now display. (Once the graphics are loaded and you aren't planning on adding any more you can turn the skin cache back on and un-tick the Always Reload button.)
If you want to add more graphics then just repeat the above steps, just making sure you put each pack you install into it's own folder so you don't accidentally overwrite the config files from your earlier packs.
If you want to move or have already moved your User Data Location then please refer to this thread to move/relocate it.
Once you have located the Sports Interactive folder you should see that it contains folders for every version of Football Manager you have run on that computer, so open the folder that corresponds to the version of FM you are using.
NOTE: Since FM17 the Touch Version has it's own folders so if using that version you'll want the Touch folder, for older versions of Touch it just used the same folder as the main game.
After you have opened the correct Football Manager folder you should see a list of folders and what you need to do is locate the folder called graphics, if this folder doesn't exist then just create a new folder and call it graphics.
Now open up your graphics folder and place the files you extracted inside it.
For the most part the sub-folders you put the graphics into doesn't matter, though it is best to separate the different types into their own sub-folders so you don't accidentally overwrite your kits with logos for the same teams. The thing to watch out for when organizing are xml files called config. These are vital and should not be mixed and matched. A set of graphics will come with a config file that is unique to them in the same folder. Make sure they stay together, in the same folder and that new png files or config files are not added or overwritten into their folder.
Whilst for best results try to keep the folder names short and simple and avoid special characters where possible.
For example below is a screenshot showing what a typical end folder should look like if done correctly, note you have a config file along with several graphic files, with a short simple folder structure that stops you from accidentally overwriting the config file when installing other graphics:
Displaying Graphics in-game
Once you have added the graphics you wanted load up the game and go into the Preferences -> Interface menu and untick 'Use Caching to decrease page loading times' and tick 'Reload Skin when confirming changes in Preferences'
So the screen should look like this:
Next select confirm and your new graphics should now display. (Once the graphics are loaded and you aren't planning on adding any more you can turn the skin cache back on and un-tick the Always Reload button.)
If you want to add more graphics then just repeat the above steps, just making sure you put each pack you install into it's own folder so you don't accidentally overwrite the config files from your earlier packs.
How To Install Other Stuff
It is also possible to replace other items in Football Manager, for the most part these are installed into various folders within your User Data Location.
First make sure you have run the game at least once (just getting to the start menu and exiting is fine) so the game can create the required folders for you.
The default location of your User Data Location will be slightly different depending on the OS you are using;
Windows
C:\Users\<username>\Documents\Sports Interactive\
C:\Users\<username>\Documents\Sports Interactive\
Mac OS X
/Users/<username>/Documents/Sports Interactive/
/Users/<username>/Documents/Sports Interactive/
Linux
/home/documents/Sports Interactive/
/home/documents/Sports Interactive/
(Replacing <username> with the name of the user account that you use on that computer)
If you want to move or have already moved your User Data Location then please refer to this thread to move/relocate it.
Once you have located the Sports Interactive folder you should see that it contains folders for every version of Football Manager you have run on that computer, so open the folder that corresponds to the version of FM you are using.
NOTE: Since FM17 the Touch Version has it's own folders so if using that version you'll want the Touch folder, for older versions of Touch it just used the same folder as the main game.
After you have opened the correct Football Manager folder you should see a list of folders and what you need to do is locate the relevant folder for the item you are wanting to install, below I have listed some common examples, for other items you are best checking the site or thread where you downloaded the item from as they should have provided installation instructions.
If the below folders don't exist (and they generally won't) then just create them and once done place your extracted files in the folder indicted below:
3D Match Ball
\mesh\ball\
Pitch Textures
\textures\pitch\
2D Match Ball
\textures\match_icons\
2D Winter Match Ball
\textures\match_icons\winter\
Also note it is generally recommended to replace these items whilst the game is not running as refreshing the skin doesn't tend to refresh the match related files.
Once you have added what you want then load up the game and go into the Preferences -> Interface menu and untick 'Use Caching to decrease page loading times' and tick 'Reload Skin when confirming changes in Preferences' then select confirm and your new graphics should now display. (Once the graphics are loaded and you aren't planning on adding any more you can turn the skin cache back on and untick the Always Reload button.)
How to Transfer Files from a Previous Version
If you want to move or have already moved your User Data Location then please refer to this thread to move/relocate it.
Once you have located the Sports Interactive folder you should see that it contains folders for every version of Football Manager you have run on that computer, so open the folder that corresponds to the version of FM you are using.
NOTE: Since FM17 the Touch Version has it's own folders so if using that version you'll want the Touch folder, for older versions of Touch it just used the same folder as the main game.
After you have opened the correct Football Manager folder you should see a list of folders and what you need to do is locate the relevant folder for the item you are wanting to install, below I have listed some common examples, for other items you are best checking the site or thread where you downloaded the item from as they should have provided installation instructions.
If the below folders don't exist (and they generally won't) then just create them and once done place your extracted files in the folder indicted below:
3D Match Ball
\mesh\ball\
Pitch Textures
\textures\pitch\
2D Match Ball
\textures\match_icons\
2D Winter Match Ball
\textures\match_icons\winter\
Also note it is generally recommended to replace these items whilst the game is not running as refreshing the skin doesn't tend to refresh the match related files.
Once you have added what you want then load up the game and go into the Preferences -> Interface menu and untick 'Use Caching to decrease page loading times' and tick 'Reload Skin when confirming changes in Preferences' then select confirm and your new graphics should now display. (Once the graphics are loaded and you aren't planning on adding any more you can turn the skin cache back on and untick the Always Reload button.)
How to Transfer Files from a Previous Version
Nearly all user created graphics can be transferred from one version of Football Manager to the next, the exceptions are:
- Skins, skins can only be used for the version of the game they were made for. It may seem that a skin from last year may initially work on the new game, however when you get to a new screen you are likely to get a broken/blank screen at best or even possibly you'll cause the game to crash, so it is best to wait for the skin maker to update the skin (or make your own with permission).
- 3D kits were changed again with FM18, so if you are using FM18 on-wards you will need kits made using templates for that game on-wards, if you are playing an older version then you will need pre-FM18 templates.
- Graphics that are released in the fmf format might not work across versions, if the later version of Football Manager cannot read the fmf files you'll need to use the Resource Tool from the previous to extract the contents of the fmf file, and then either keep them extracted and treat as normal files or repack them using the Resource Tool from the current version.
There are two ways of transferring your graphics between versions of Football Manager;
1. Manually move your graphics folder (or the folders that contain the stuff you want transferring over) from the User Data Location of the current Football Manager, to the same location within the User Data Location of the new Football Manager. When transferring content over make sure it keeps the same folder structure (unless instructed otherwise).
2. Change the User Data Location of the new version of Football Manager to point to the location you were using for the current version. (Note if doing this you might want to move none graphical user files to another location to save you accidentally overwriting them with the new edition or you causing problems by trying to read older version files in the current edition.)
Once you have done that then:
Go into the Preferences -> Interface menu and un-tick 'Use Caching to decrease page loading times' and tick 'Reload Skin when confirming changes in Preferences' then select confirm and your new graphics should now display. (Once the graphics are loaded and you aren't planning on adding any more you can turn the skin cache back on and un-tick the Always Reload button.)
Once you have done that then:
Go into the Preferences -> Interface menu and un-tick 'Use Caching to decrease page loading times' and tick 'Reload Skin when confirming changes in Preferences' then select confirm and your new graphics should now display. (Once the graphics are loaded and you aren't planning on adding any more you can turn the skin cache back on and un-tick the Always Reload button.)
---
Redistribution Terms
You are free to post this content to your website provided:
1. It is not sold or behind a paywall.
2. You don't advertise it as being exclusive to your website.
3. My username and blog address are included: http://michaeltmurrayuk.blogspot.co.uk/
Redistribution Terms
You are free to post this content to your website provided:
1. It is not sold or behind a paywall.
2. You don't advertise it as being exclusive to your website.
3. My username and blog address are included: http://michaeltmurrayuk.blogspot.co.uk/
If you have any questions then the best place to ask them is in the Skinning Forums at the Official SIGames Forums where I can be found most days.
If you like my work then feel free to send me a donation this is completely optional all of my content is and will always be free to access.
